Serie WCV – Válvula Wafer Check de 2″ a 12″ en PVC y CPVC marca HAYWARD
Diseño de disco y eje de una sola pieza, puerto de entrada perimetral para facilitar el flujo, presión nominal de 150 PSI/PN10 en todas las medidas.
MEDIDAS
2″ a 12″
MATERIAL
PVC y CPVC
Compartir:
-
Descripción
-
Información adicional
CARACTERÍSTICAS CLAVE
• Robust Wide Pattern Body in PVC – No Need for Spacers or specialty fl anges.
• One-Piece Disc and Shaft Design
• Designed for ANSI150 and PN10 Flanges
• High Cv Rating Equal to Metal Check Valves
• Lower Closing Pressure Than Swing Check Valves
• Integral Bolt Eyes for Ease of Installation for Large Sizes
• Can be Installed in Vertical or Horizontal Position
• FPM or EPDM Gasket and Face Seal
• Pressure Rated to 150 PSI / PN10 In All Sizes
OPCIONES
• 316 Stainless Steel or Hastelloy® Disc Spring Return
Descargar Especificaciones Técnicas 2″ a 8″
• Robust Wide Pattern Body in PVC – No Need for Spacers or specialty fl anges.
• One-Piece Disc and Shaft Design
• Designed for ANSI150 and PN10 Flanges
• High Cv Rating Equal to Metal Check Valves
• Lower Closing Pressure Than Swing Check Valves
• Integral Bolt Eyes for Ease of Installation for Large Sizes
• Can be Installed in Vertical or Horizontal Position
• FPM or EPDM Gasket and Face Seal
• Pressure Rated to 150 PSI / PN10 In All Sizes
OPCIONES
• 316 Stainless Steel or Hastelloy® Disc Spring Return
Descargar Especificaciones Técnicas 2″ a 8″
| Medidas | 2″ a 12″ |
|---|---|
| Material | PVC y CPVC |
